TSD Digital Loadcell

3D Step

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

KOBASTAR INDUSTRIAL WEIGHING SYSTEMS

Features:

TSD Digital loadcell is a digital load cell made of high quality stainless steels working in pressure type.
It can be used in vehicle scales, wagon scales, tank and silo weighing.
TSD Digital loadcell measurement area is closed with stainless steel pipes and covers to prevent damage from environmental factors and protected by laser welding and made dust and waterproof (IP68).
With the embedded ADC and microprocessor communication card inside the TSD Digital loadcell body, the load cells communicate digitally with the weighing indicator via RS485.
The armored cables used as standard are more resistant to external factors and provide protection from rodents such as mice.
With 2 IP68 connectors on it, the cables connect the load cells to each other in a chained manner, so there is no need to use an external collection box.
Working with Kobastar KD series digital indicator, TSD Digital load cell corner settings are easily made digitally via the indicator.

Application Areas:

Vehicle scales, Wagon scales, Tank and Silo weighing

Categories: Compression Type Load Cell

Stock code:TSD

Capacity	: 20, 30, 40, 50, 60, 100 Ton
Accuracy class	: C5
Minimum Load	: 20 kg
Maximum Ranges (nLC)	: 5000
Minimum Verification Interval	: 10000
Total Error	: ±0.01 %FS
Communication Format	: Rs485 Digital
Speed of Communication	: 9600 / 19200 Bps
Linear	: ±0,02% FS
Repeatability	: ±0.01% FS
Insulation Resistance	: ≤ 5000 MΩ (100VDC)
Compared Temperature	: -10 ˜ + 40 °C
Operating Temperature	: -30 ˜ + 70 °C
Excitation, Recommended Voltage	: 12 VDC
Maximum Excitation Voltage (Umax)	: 18 VDC
Safe Overload	: %150 FS
Ultimate Overload	: %300 FS
Ingress Protection (EN60529)	: IP 68
Element Material	: Stainless steel
Cable	: 16 meters Outer Diameter 8.8mm

TSD Digital Loadcell Advantages

With high-level error reporting, it is under constant control, it can be interfered instantly in case of any error.

There is no need to calibration again if you change the defective one with the new one.

It is used without problems for years with softwareized corner adjustment.

TSD Digital load cell also consists of the analog signal, which is located next to the A/D converter and there are also sent to the microprocessor in the load cell so that the analog signal does not come to the remote distance.

Higher precision and accuracy have less error percentages.