Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
WT2 Tension Control
Features:
- The WT2 Tension Control Load Cell is manufactured to provide tension control on winding and unwinding reels. It is mounted on the reel end via a bearing or reel shaft placed on the bearing on the load cell, precisely detecting the force applied to the reel during winding and unwinding operations. Its clamp design allows for easy and quick installation. It is used in many industrial applications, primarily in the textile and printing industries.
Application Areas:
- Tension control
- Textile weaving machines
- Printing machines
Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
| Capacity | 10–25–50 Kg |
| Accuracy Class | 0.50% |
| Minimum Load | 0 kg |
| Minimum Measurement Range | 10000 (Y=Emax / Vmin) |
| Total Error | ±0.02 %FS |
| Output Gain (FS) | 2.00 ± 0.005 mV/V |
| Zero Balance | ± 1 %FS |
| Input Resistance | 400 Ω ± 20 Ω |
| Output Resistance | 350 Ω ± 5 Ω |
| Insulation Resistance | ≤ 5000 MΩ (100VDC) |
| Compensated Operating Temperature | -10 ~ +40 °C |
| Operating Temperature Range | -10 ~ +70 °C |
| Recommended Excitation Voltage | 10 VDC |
| Maximum Excitation Voltage (Umax) | 15 VDC |
| Overload Capacity | 150 % FS |
| Fracture Load | 300 % FS |
| Protection Class (EN60529) | IP 40 |
| Load Cell Material | Alloy Steel |
| Cable | 4x014mm² – 3.5 m with connector |
