SGS Compression Type Load Cell

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

KOBASTAR INDUSTRIAL WEIGHING SYSTEMS

Features:

The SGS model strain sensor is an extensometer used to measure the weight inside the silo, especially in high-capacity silos.
It is a sensor that can be applied to the feet or body of the silo without making any changes to the integrity of the silo.
SGS can also be used in structural load and force measurements, such as in rolling mills and bridges, and in moment measurements.
SGS is a strain gauge-based sensor with a nickel-plated steel body and has an IP66 protection class.
It can be easily mounted to the desired location using the holes on both ends.

Tank Weighing or Leveling Systems, Agricultural Equipment, Rolling, Moment Sensing, Structural Loading Measurements, Bridges

Stock code:SGS

Maximum capacity (Emax.)	650 μm
Rated Output (RO)	1.370 mV/V
Accuracy class according to OIML R60	D
Maximum number of validation intervals (nmax)	500
Temperature effect on minimum dead load output (TCO)	±0,05 %*RO/10°C
Effect on Temperature Sensitivity (TCRO)	±0,05 %*RO/10°C
Combined error	±1 %*RO
Nonlinear	±0.1 %*RO
Histerezis	±0.1 %*RO
Creep error (30 minutes) / DR	±0.1 %*RO
Zero balance	±0.01 mV/V
Excitation voltage	5–15 V
Input resistance (RLC)	385 Ω
Output resistance (Rout)	352 Ω
Insulation resistance (100 V DC)	≥ 5.000 MΩ
Safe load limit (Elim)	%300*Emax
Final load	%500*Emax
Compensated temperature range	−10~+40 °C
Operating temperature range	−40~+80 °C
Load cell material	Alloy Steel
Protection according to EN 60 529	IP66