Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
ROPE 3T Rope Type Elevator Overload Control
Features:
- Our load cell units, specifically optimized for elevator rope systems, continuously monitor the car weight and load changes in real time. With their compact design that can be easily mounted on the rope, high measurement accuracy, and long-lasting durability, they prevent the elevator from exceeding its overload limits, ensuring safe operation. Fully compliant with EN 81 standards, they offer quick integration into modern elevator control systems.
- Easy Installation: Practical design that attaches directly to the cables.
- High Safety: Full protection with instant signal output in case of overload.
- Precise Measurement: Stable operation with low margin of error.
- Durability: Long-lasting alloy steel housing suitable for industrial conditions.
Application Areas:
- Elevator Overload Systems
Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
| Nominal Load | 300 kg |
| Safe Overload | 150% R.C. |
| Rated Output | 2.0 ± 0.15% mV/V |
| Temp. Effect on Rated Output | ± 0.2 % R.O. / 10 °C |
| Total Error | 0.1 % F.S. |
| Zero Balance | ± 1 % F.S. |
| Temp. Effect on Zero | ± 0.2 % R.O. / 10 °C |
| Input Resistance | 380 ± 20 Ω |
| Output Resistance | 350 ± 5 Ω |
| Insulation Resistance | >= 5000 M Ω |
| Reference Excitation | 5-12 VDC |
| Maximum Excitation | 24 VDC |
| Cable Type and Length | Ø6, 4×0.22 mm², 1350 mm |
| Sensor Material | Anidized Aluminium |
| Operating Temperature | -20 °C + 70 °C |
| Compensated Temperature | -10 °C + 50 °C |
