RLT Running Line Tensiometer

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

KOBASTAR INDUSTRIAL WEIGHING SYSTEMS

Features:

RLT Moving Rope Strain Sensor is a load cell specially designed to measure the tension applied to moving ropes.
It is mounted on the moving rope in the cranes, there is no need for any revision in the crane for installation, it is very easy to install.
Robust body equipped with roller bearings, capacity options from 1 ton to 50 tons.
Rope diameters from 6mm to 52mm.
Wired and wireless operation options corrosion resistant stainless steel or galvanized steel construction.
Standard mV/V signal output, 4-20mA and 0-10V Analog and RS485 Digital output options.

Stock code:RLT

Capacity	From 1 ton to 50 tons
Accuracy class	D1
Minimum Load	0 kg
Maximum Number of Partitions (nLC)	–
Minimum Measurement Range	–
Total Error	±0,5 %FS
Output Gain (FS)	1.2 ± 0.2 mV/V
Zero Balance	± %1 FS
Ingress Resistance	380 Ω ± 20 Ω / 720 Ω ± 20 Ω
Output Resistance	350 Ω ± 5 Ω / 702 Ω ± 5 Ω
Insulation Resistance	≤ 5000 MΩ (100VDC)
Compensated Operating Temperature	-10~+40°C (Option)
Operating Temperature Range	-30 ~ +70 °C
Recommended Excitation Voltage	10 VDC
Maximum Excitation Voltage (Umax)	15 VDC
Overload Capacity	%150 FS
Breaking Load	%300 FS
Protection Class (EN60529)	IP 66
Load Cell Material	Galvanized Steel / Stainless Steel
Cable	4x022mm²