ZM Force and Torque Sensor

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.

E-mail address

KOBASTAR INDUSTRIAL WEIGHING SYSTEMS

Features:

The ZM force sensor is a type of transducer that utilizes an independent Wheatstone full bridge for each axis, producing an output of mV/V in M units of measure when subjected to Z force.
Typical applications for this type of transducer include robotics, automotive crash testing, industrial test benches, grinding force control and actuator operating force measurement.

Stock code:ZM

Capacity	: Z= 50kg – m= 20Nm
Accuracy class	: 0.5%
Minimum Load	: 0 kg
Total Error	: ±0.2 %FS
Output Sensitivity (FS)	: 1.00 ± 0.01mV/V
Zero Balance	: ± %1 FS
Ingress Resistance	: 740 Ω ± 10 Ω
Output Resistance	: 700 Ω ± 5 Ω
Insulation Resistance	: ≤ 5000 MΩ (100VDC)
Compared Temperature	: -10 ˜ + 40 °C
Operating Temperature	: -30 ˜ + 70 °C
Excitation, Recommended Voltage	: 10 VDC
Maximum Excitation Voltage (Umax)	: 15 VDC
Safe Overload	: %120 FS
Ultimate Overload	: %200 FS
Ingress Protection (EN60529)	: IP 65
Element Material	: Aluminum
Cable	: 2 – 4x022mm2 – 2Metre