Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
WT5 Tension Control Load Cell
Features:
- WT5 is a load cell developed for tension and tension control applications by mutually attaching to the end parts of the cylinders whose bearings are on their own.
- With its clamped structure, it can be easily mounted on the fixed shaft parts of the rollers.
- It is used in all sectors where tension control applications such as textile, printing, bag, flexo printing machines, cable manufacturing machines.
- Its strength is maximised with its completely steel body structure.
- Available in nickel plated alloy steel or stainless steel.
Application Areas:
- Textile weaving machines, Printing press machines, Bag Flexo Printing Machines, Cable manufacturing machines
Technical Documents:
To view datasheet files, you must enter your e-mail address and type the verification code sent to your e-mail.
| Capacity | 25–50–100–150–200–250–300–500 kg |
| Accuracy Class | 0.5% |
| Minimum Load | 0 kg |
| Minimum Measurement Range | 10000 (Y=Emax / Vmin) |
| Total Error | ±0.02 %FS |
| Output Gain (FS) | 2.00 ± 0.005 mV/V |
| Zero Balance | ± 1 %FS |
| Input Resistance | 400 Ω ± 20 Ω |
| Output Resistance | 350 Ω ± 5 Ω |
| Insulation Resistance | ≤ 5000 MΩ (100VDC) |
| Compensated Operating Temperature | -10 ~ +40 °C |
| Operating Temperature Range | -30 ~ +70 °C |
| Recommended Excitation Voltage | 10 VDC |
| Maximum Excitation Voltage (Umax) | 15 VDC |
| Overload Capacity | 150 % FS |
| Fracture Load | 300 % FS |
| Protection Class (EN60529) | IP 54 |
| Load Cell Material | Alloy Steel |
| Cable | 4x014mm² – 3.5 m with connector |
