General Details

SCX Load Cell

SCX Load Cell is produced using special alloy steels and optional stainless steel versions are also available.

Alloy steel models are hardened by heat treatment and cleaned by sandblasting method. All surfaces are coated with Nickel homogeneously and become more resistant to corrosion.

SCX is tested according to the test procedures specified in the OIML R60 recommendations.

SCX Load Cell used in Weighbridge, Truck Scale, silo, tank, casting crucible and industrial areas.

The measuring zone is welded with stainless steel covers to make it resistant to all kinds of adverse environmental conditions, dust and water protection level is IP67 (EN 60529).

The rubber mounting kits specially manufactured for the SCX Load Cell provide stable weighing in vibrating environments. It is not affected by the expansion caused by heat changes.

No corner adjustment required for multiple uses depending on standard mV / V outputs.

Cable;

SCX Load Cell is equipped with 4x022mm2 PVC flame retardant outer sheath, Aluminum and tinned copper braided shielded cable to protect against external noise and signals.

Optionally, armored or exproof silicon cables can be preferred.

SCX Load Cell are more resistant to external influences with armored cables, also provide protection from rodents such as mice.

Silicone cables provide excellent heat shield in high temperature working environments, can be used up to 180 ° C continuous temperature and short term up to 220 ° C. Silicone cables are used in both high and low temperatures up to -60 ° C thanks to their excellent climate resistance.

If you would like any more information about pancake load cells, please contact us and a member of our team would be happy to provide support.Kobastar is always with you.

Features

– Capacity Range: 10 t. to 30 t.

– Alloy steel and stainless steel

– IP68 Protection

– High accuracy

Application

– Weighbridge

– Tank and Silo weighing

– Casting crucible

Info

Working Princible

Color Code

Technical info
Capacity : 10, 20, 25, 30 Ton
Accuracy Class : C3
Minimum Load : 0 kg
Maximum Intervals (nLC) : 3000
Minimum Verification Interval : 10000
Total Error : ±0.02 %FS
Output Sensitivity (FS) : 2.00 ± 0.005mV/V
Zero Balance :  ± 1 %FS
Input Resistance : 380 Ω ± 20 Ω
Output Resistance : 351 Ω ± 3 Ω
Isolation Resistance :  ≤ 5000 MΩ (100VDC)
Compansated Temperature : -10 ˜ + 40  °C
Operating Temperature : -30 ˜ + 70  °C
Excitation, Recommended Voltage : 10 VDC
Maximum Excitation Voltage (Umax) : 15 VDC
Safe Overload : 150 % FS
Ultimate Overload : 300 % FS
Ingress Protection (EN60529) : IP 68
Element Material : Alloy Steel / Stainless Steel
Cable : 4x050mm²