17 August 2020

60 Ton Scale Calibration

Weight measurement is a process that is needed in almost every field. In order for this process to be done correctly and efficiently, it must be ensured that the measuring devices provide the correct data. In this regard, it is essential to perform calibration in systems such as heavy measuring truck scales. By performing a good calibration process, you can be sure that the scale is measuring at the correct parameters and the operations can be carried out without any disruption.

What is 60 Ton Scale Calibration?

60 ton scale, 60 Ton Scale Calibration, KOBASTAR Load Cell & Indicator

60 Ton Truck Scale

Calibration is required for all devices measuring in different units and areas. Calibration is basically the verification of the measurement unit with different units. There is no single unit of measurement used all over the world when calculating weight values. The best way to confirm measurements made in one unit is to compare them with other units. In this way, you can be sure that the devices are working with the correct parameters. It will be useful to explain a situation here. Setting the devices at a level to measure and making them ready does not correspond to the calibration process. Calibration is mostly performed by comparing the value obtained from one device with the values ​​taken from other devices. In this regard, in order to use devices that measure high parameters such as truck scales, the calibration process must be applied.  

Why should 60-ton scale calibration be performed?

Even the slightest error in weight measurements can have serious consequences. Therefore, before starting to use the truck scale, it should be made sure that it works 100% and gives correct results. All operations in stages such as logistics, production, distribution, and storage are carried out according to the data received from the scales. Calibration should therefore be done regularly.

What Should You Pay Attention To When Calibrating A 60-Ton Scale?

60 ton scale, 60 Ton Scale Calibration, KOBASTAR Load Cell & Indicator

60 Ton Scale

It is important that the devices used in the calibration process are accurate and reliable. In addition, the equivalents of the unit weight in other units should also be checked and the truck scale calibration should be done meticulously. If you need help in this regard, it will be useful to trust a company specialized in the field. As Kobastar, we successfully carry out the calibration process in all of our production stages. You can contact us to make accurate measurements of truck scales and other load cell models that make heavy measurements. The calibration process is carried out completely in all the products we sell.

TS5 Truck Scale

60 ~ 80 ton, 3x8 ~ 3x20 Meters

TS2 Truck Scale

40 ~ 100 ton, 3x6 ~ 3x22 Meters

TS3 Truck Scale

40 ~ 100 ton, 3x6 ~ 3x22 Meters

TS1 Truck Scale

10 ~ 100 ton, 3x6 ~ 3x22 Meters

Genel_en , , , ,
About Ensar Vatandaş